• Welcome Guest to the new PlayerSquared! Please be aware the site is a work in progress & we'd appreciate your help in letting us know which features from the old site we're currently missing as well as report any bugs you find via this thread here: Bugs/Missing Features
  • If this is your first visit You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Sign up today to get the latest PS4 GameSaves, Game Mods and much more!

Hybridfirmware 4.87 + HEN Install (Deutsch + Englisch)

7h1nk

What if all that you ever knew was a Lie
VIP User
October 22, 2020
494
1,454
0
198
Hey Everyone,

this is a guide to install HEN on all PS3 Modells for Firmware 4.87.
Sorry for my bad English i hope everyone understand what i mean :).
A German Instruction is below / Deutsche Beschreibung ist weiter unten

First you need a USB stick in FAT32 format (2-4GB) and the following file:
https://mega.nz/file/c05mxRyS#lDiu_6AzAlTFFJ6dAW1fD9NceZ-YzxIKiS_7-vwzYWo

The page on the PS3 browser is called tiny.cc/4416tz

1. Create a folder PS3 on the USB stick. In this folder you create another folder UPDATE.
2. Extract the RAR file and copy the content (PS3UPDAT.PUP) to the UPDATE folder.
3. Connect the USB stick to the PS3 and start it in recovery mode.
(Switch off your PS3, as soon as the red LED lights up, the console is in standby mode. Now press the power button and hold it down until you hear a beep, keep your finger on the button until you hear another beep, now the LED jump from green to red. Now press the power button again, the PS3 beeps again and the LED jumps to green. Keep your finger on the button until you hear another beep, keep your finger up until you hear two beeps Now you can take your finger off the power button again, the message should now appear on the screen that you have to connect your controller via USB. Welcome to the recovery menu, should it not work or you are shown that your video settings have been reset you did something wrong and should start again at point 1.)
4. Go to point 6 System update and follow the instructions on the screen. After the update
you should get back to the normal start screen of the PS3.
5. Log in and go to the internet browser. Press the triangle key to go to the Internet browser menu. Click on Tools and then on Homepage. Now you set it to Use a blank page.
6. Go to the PS3 browser menu again and go back to Tools. Now you have to delete the cookies, delete the search history, delete cache memory and delete authentication information.
Then you can close the browser (hold down the O key).
7. Open the internet browser again and you should land on a white page. Now press the start button on the controller so that you can enter the address. Go to PS3Xploit - HEN Installer
Edit: i cant test it now but i think the new exploit Adress is PS3Xploit - HEN Installer
8. Wait for the initializing display to reach 100%. You will now see further instructions that you are following.
9. To do this, you have to close the Internet browser again and start Remote Play. As soon as you have started it and see the instructions for connecting the Remote Play, you can close it again (O key).
10. Now you can see the entry ALL_HEN_TODOS_OS HEN in the category Network. Click on it and go to Install. First a file will be downloaded and then installed.
If you have problems downloading, log into the PSN network with your PSN account (I use a fake account for this)
11. As soon as everything is installed, turn off the PS3.
12. Now restart the PS3 and you will see the entry Enable_HEN under the category Games
13. To use backup copies of games or homebrew applications, you have to go to Enable HEN and activate it each time you start the PS3.


If you have any further questions you can answer in the thread or send me a PM. Have fun and see you next time.
Regards 7h1nk




Als erstes benötigt ihr ein USB Stick im FAT32 Format (2-4GB) und die folgende Datei:
https://mega.nz/file/c05mxRyS#lDiu_6AzAlTFFJ6dAW1fD9NceZ-YzxIKiS_7-vwzYWo

Die Seite auf dem PS3 Browser heißt tiny.cc/4416tz

1. Erstellt auf dem USB Stick ein Ordner PS3. In Diesen Ordner erstellt ihr einen weiteren Ordner UPDATE.
2. Entpackt die RAR Datei und kopiert den Inhalt (PS3UPDAT.PUP) in den Ordner UPDATE.
3. Schließt den USB Stick an die PS3 an und startet diese im Recovery Mode.
(Schaltet eure PS3 aus, sobald die rote LED leuchtet ist die Konsole im Standby Modus.Drückt nun die Einschalttaste und haltet diese gedrückt bis ihr ein piepsen hört, lasst den Finger nun weiter auf der Taste bis ihr ein weiteres piepsen hört, nun sollte die LED von grün auf rot springen.Drückt nun wieder auf die Powertaste, die PS3 piepst wieder und die LED springt auf grün. Haltet den Finger weiter auf der Taste bis ihr einen weiteren piepston hört, lasst den Finger nun noch länger oben bis ihr zwei piepser nacheinander hört. Nun könnt Ihr den Finger wieder von der Powertaste nehmen, am Bildschirm sollte nun die Meldung erscheinen das Ihr euren Controller per USB anschließen müsst. Willkommen im Recovery Menü, sollte es nicht geklappt haben oder Ihr angezeigt bekommt das eure Videoeinstellungen zurückgesetzt wurden habt ihr etwas falsch gemacht und solltet wieder bei Punkt 1 beginnen.)
4. Geht auf den Punkt 6 System Aktualisierung und folgt den Anweisungen auf dem Bildschirm. Nach dem Update
solltet ihr wieder zum normalen Startbildschirm der PS3 gelangen.
5. Meldet euch an und geht zum Internet Browser. Drückt die Dreieck Taste um ins Menü des Internet Browsers zu gelangen. Klickt auf Werkzeuge und danach auf Homepage. Jetzt stellt ihr es auf Leere Seite verwenden.
6. Geht erneut ins Menü des PS3 Browsers und wieder auf Werkzeuge. Jetzt müsst ihr die Cookies löschen, den Suchverlauf löschen, Cache-Speicher löschen und Authentifikationsinformationen löschen.
Danach könnt ihr den Browser schließen (O Taste gedrückt halten).
7. Öffnet erneut den Internet Browser und ihr solltet auf einer weißen Seite landen. Drückt jetzt die Start Taste auf dem Controller damit ihr zur Adress Eingabe kommt. Geht auf die Seite PS3Xploit - HEN Installer
Edit: kann es momentan nicht testen aber ich denke die neue Exploit Adresse ist
PS3Xploit - HEN Installer

8. Wartet die anzeige Initalizing ab bis sie auf 100% ist. Ihr seht jetzt noch weitere Anweisungen die ihr befolgt.
9. Ihr müsst dafür den Internet Browser wieder schließen und Remote Play starten. Sobald ihr es gestartet habt und die Anweisungen zum verbinden des Remote Play seht könnt ihr es auch wieder schließen (O Taste).
10. Jetzt seht ihr den Eintrag ALL_HEN_TODOS_OS HEN in der Kategorie Netzwerk. Klickt es an und geht auf Installieren. Es wird jetzt erst eine Datei heruntergeladen und danach Installiert. Falls ihr Probleme beim Download bekommt meldet euch mit euren PSN Account im PSN Netzwerk an (Ich nutze dafür ein Fake Account)
11. Sobald alles Installiert ist schaltet ihr die PS3 aus.
12. Startet jetzt die PS3 wieder neu und ihr seht unter der Kategorie Spiele den Eintrag Enable_HEN
13. Um Sicherheitskopien von Spielen zu nutzen oder Homebrew Anwendungen müsst ihr nach jedem Start der PS3 erst auf Enable HEN gehen und es aktivieren.


Falls ihr noch weitere Fragen habt könnt ihr gern im Thread antworten oder mir ne PN schicken. Viel Spaß und bis zum nächsten mal.
Grüße 7h1nk
 
Last edited:
Hey Everyone,

this is a guide to install HEN on all PS3 Modells for Firmware 4.87.
Sorry for my bad English i hope everyone understand what i mean :).
A German Instruction is below / Deutsche Beschreibung ist weiter unten

First you need a USB stick in FAT32 format (2-4GB) and the following file:
https://mega.nz/file/c05mxRyS#lDiu_6AzAlTFFJ6dAW1fD9NceZ-YzxIKiS_7-vwzYWo

The page on the PS3 browser is called tiny.cc/4416tz

1. Create a folder PS3 on the USB stick. In this folder you create another folder UPDATE.
2. Extract the RAR file and copy the content (PS3UPDAT.PUP) to the UPDATE folder.
3. Connect the USB stick to the PS3 and start it in recovery mode.
(Switch off your PS3, as soon as the red LED lights up, the console is in standby mode. Now press the power button and hold it down until you hear a beep, keep your finger on the button until you hear another beep, now the LED jump from green to red. Now press the power button again, the PS3 beeps again and the LED jumps to green. Keep your finger on the button until you hear another beep, keep your finger up until you hear two beeps Now you can take your finger off the power button again, the message should now appear on the screen that you have to connect your controller via USB. Welcome to the recovery menu, should it not work or you are shown that your video settings have been reset you did something wrong and should start again at point 1.)
4. Go to point 6 System update and follow the instructions on the screen. After the update
you should get back to the normal start screen of the PS3.
5. Log in and go to the internet browser. Press the triangle key to go to the Internet browser menu. Click on Tools and then on Homepage. Now you set it to Use a blank page.
6. Go to the PS3 browser menu again and go back to Tools. Now you have to delete the cookies, delete the search history, delete cache memory and delete authentication information.
Then you can close the browser (hold down the O key).
7. Open the internet browser again and you should land on a white page. Now press the start button on the controller so that you can enter the address. Go to PS3Xploit - HEN Installer
8. Wait for the initializing display to reach 100%. You will now see further instructions that you are following.
9. To do this, you have to close the Internet browser again and start Remote Play. As soon as you have started it and see the instructions for connecting the Remote Play, you can close it again (O key).
10. Now you can see the entry ALL_HEN_TODOS_OS HEN in the category Network. Click on it and go to Install. First a file will be downloaded and then installed.
If you have problems downloading, log into the PSN network with your PSN account (I use a fake account for this)
11. As soon as everything is installed, turn off the PS3.
12. Now restart the PS3 and you will see the entry Enable_HEN under the category Games
13. To use backup copies of games or homebrew applications, you have to go to Enable HEN and activate it each time you start the PS3.


If you have any further questions you can answer in the thread or send me a PM. Have fun and see you next time.
Regards 7h1nk




Als erstes benötigt ihr ein USB Stick im FAT32 Format (2-4GB) und die folgende Datei:
https://mega.nz/file/c05mxRyS#lDiu_6AzAlTFFJ6dAW1fD9NceZ-YzxIKiS_7-vwzYWo

Die Seite auf dem PS3 Browser heißt tiny.cc/4416tz

1. Erstellt auf dem USB Stick ein Ordner PS3. In Diesen Ordner erstellt ihr einen weiteren Ordner UPDATE.
2. Entpackt die RAR Datei und kopiert den Inhalt (PS3UPDAT.PUP) in den Ordner UPDATE.
3. Schließt den USB Stick an die PS3 an und startet diese im Recovery Mode.
(Schaltet eure PS3 aus, sobald die rote LED leuchtet ist die Konsole im Standby Modus.Drückt nun die Einschalttaste und haltet diese gedrückt bis ihr ein piepsen hört, lasst den Finger nun weiter auf der Taste bis ihr ein weiteres piepsen hört, nun sollte die LED von grün auf rot springen.Drückt nun wieder auf die Powertaste, die PS3 piepst wieder und die LED springt auf grün. Haltet den Finger weiter auf der Taste bis ihr einen weiteren piepston hört, lasst den Finger nun noch länger oben bis ihr zwei piepser nacheinander hört. Nun könnt Ihr den Finger wieder von der Powertaste nehmen, am Bildschirm sollte nun die Meldung erscheinen das Ihr euren Controller per USB anschließen müsst. Willkommen im Recovery Menü, sollte es nicht geklappt haben oder Ihr angezeigt bekommt das eure Videoeinstellungen zurückgesetzt wurden habt ihr etwas falsch gemacht und solltet wieder bei Punkt 1 beginnen.)
4. Geht auf den Punkt 6 System Aktualisierung und folgt den Anweisungen auf dem Bildschirm. Nach dem Update
solltet ihr wieder zum normalen Startbildschirm der PS3 gelangen.
5. Meldet euch an und geht zum Internet Browser. Drückt die Dreieck Taste um ins Menü des Internet Browsers zu gelangen. Klickt auf Werkzeuge und danach auf Homepage. Jetzt stellt ihr es auf Leere Seite verwenden.
6. Geht erneut ins Menü des PS3 Browsers und wieder auf Werkzeuge. Jetzt müsst ihr die Cookies löschen, den Suchverlauf löschen, Cache-Speicher löschen und Authentifikationsinformationen löschen.
Danach könnt ihr den Browser schließen (O Taste gedrückt halten).
7. Öffnet erneut den Internet Browser und ihr solltet auf einer weißen Seite landen. Drückt jetzt die Start Taste auf dem Controller damit ihr zur Adress Eingabe kommt. Geht auf die Seite PS3Xploit - HEN Installer
8. Wartet die anzeige Initalizing ab bis sie auf 100% ist. Ihr seht jetzt noch weitere Anweisungen die ihr befolgt.
9. Ihr müsst dafür den Internet Browser wieder schließen und Remote Play starten. Sobald ihr es gestartet habt und die Anweisungen zum verbinden des Remote Play seht könnt ihr es auch wieder schließen (O Taste).
10. Jetzt seht ihr den Eintrag ALL_HEN_TODOS_OS HEN in der Kategorie Netzwerk. Klickt es an und geht auf Installieren. Es wird jetzt erst eine Datei heruntergeladen und danach Installiert. Falls ihr Probleme beim Download bekommt meldet euch mit euren PSN Account im PSN Netzwerk an (Ich nutze dafür ein Fake Account)
11. Sobald alles Installiert ist schaltet ihr die PS3 aus.
12. Startet jetzt die PS3 wieder neu und ihr seht unter der Kategorie Spiele den Eintrag Enable_HEN
13. Um Sicherheitskopien von Spielen zu nutzen oder Homebrew Anwendungen müsst ihr nach jedem Start der PS3 erst auf Enable HEN gehen und es aktivieren.


Falls ihr noch weitere Fragen habt könnt ihr gern im Thread antworten oder mir ne PN schicken. Viel Spaß und bis zum nächsten mal.
Grüße 7h1nk

Dankeschön für den Post. Werde ich die Tage einmal probieren.