Start Of Codes for AC - Valhalla Codes [Save Wizard] <-- Click Me
you know the drill, will keep it updated for as long as I can
you know the drill, will keep it updated for as long as I can
Last edited:
-
Before registering an account on PlayerSquared you must first agree that you are at least 13 years of age & have read & agree to our Terms & rules & our Privacy policy.To hide your download link, use the following BBCodes:You can set specific reactions (like "Thanks," "Love," etc.) that must be selected to unlock the download link. List the reaction numbers like this: 1, 2, 3, etc. 1 = Thanks 2 = Love 3 = Haha 4 = Wow 6 = Canada Thanks or you can use:
Which allows you to charge a certain credit amount in order for someone to get access to the download link. The button to unlock the link will appear in the bottom right corner of the post.
You have 1 minute after liking a post to un-like or change your reaction before it becomes permanent. This was done to stop people from liking a post, getting the content then un-liking it.
Assassin's Creed Valhalla Codes
- Thread starter -Z3RO-
- Start date
Start Of Codes for AC - Valhalla Codes [Save Wizard]
you know the drill, will keep it updated for as long as I can
Every code on this list is made by Skiller.
Cross Post from NGU, since someone didn't have a clue on how to set custom values...
Z3R0's paste explains it in more detail...
Google Doc IDS
EG Silver Desired Value: (Search ID Method)
Template:
Code:800X0008 HHHHHHHH <-- ID Start GGGGGGGG 00000000 <-- ID End 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 VVVVVVVV <-- Desired Value (05F5E0FF = 99999999) [Big Endian]
Silver Id = 55F6B9FD1B000000 from the google doc
using the template
Code:800X0008 55F6B9FD 1B000000 00000000 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 05F5E0FF
OR Value Search Method Only (Will search for anything that matches the value you are looking for & replaces it with desired value)
Template:
Code:800X000E 0007000B VVVVVVVV 52000000 <-- V's the value you are looking for FFFD0000 00000000 28000004 05F5E0FF <-- 05F5E0FF = 99999999, the value that is being set to
if you have everything at 99999999, using this method to change it to say 1,000 in hex the value is 3E8, add 0's in front of it to make it 8 characters long to become 000003E8
Code:8001000E 0007000B FFE0F505 52000000 <-- Search for 99999999 (FFE0F505 In HEX Litte Endian) FFFD0000 00000000 28000004 000003E8 <-- sets to 1,000 (000003E8 In HEX Big Endian)
Edit 2: Further explanation was needed on NGU this just a backup of a good explanation incase when NGU goes go down it will still be here...
the codes provided in the paste are swap codes
titanium
Code:80010024 0B0155F6 <-- this is the reference to silver but very different to the other ones provided in the template its doing 0B0 + 155F6B9FD1B00 which is part of the ID to silver B9FD1B00 00001600 0000B8D1 1793B8D1 17930000 1C000B01 FEF663DF 7C010000 A8000002 00000008 8E9FD8BC C7010000 <-- this is the ID of titanium not the value
I don't think this has a value. this simply looks for silver & swaps it out for the desired item. so say you had 9334 silver you will now have 9334 titanium
I've only analysed the example template codes & broken them down. the ones provided from discord channels are swap codes the part that you can edit with those is the ID to the item you want to swap to
if you want to edit the value of all items matching say 9999 to 1,000
Note: all this does is Search & Replace (Find X Value, Replace With X Value)
Code:8001000E 0007000B 0F270000 52000000 <-- 1st part value in Little Endien FFFD0000 00000000 28000004 05F5E0FF <-- 05F5E0FF = 99999999, the value that is being set to (Big Endien)
Get Value To Little Endien Hex
<-- be sure to add the 0's at the end as it needs to be 8 characters long, 9999 results you get 0F27 then add 0's after it to make it 0F270000.
Get Value To Hex Big Endien Hex <-- be sure to add 0's before the value. so for 1,000 you get 3E8 then add 0's to make it 000003E8
So Little Endien format when your searching for the value that you want to find <-- only applied to the above template
Big Endian (Little Box Unticked) for the value you are setting. <- most codes that just apply only use this.
this due because PS4 saves use Little Endian (Reverse Byte order) for its values.
and using the above template to target all 4 blocks at once
it will look like this:
Code:8001000E 0007000B <-- Note the 1 in 8010000E 0F270000 52000000 <-- Search Value 9999 Little Endien FFFD0000 00000000 28000004 000003E8 <-- 000003E8 = 1,000, the value that is being set to (Big Endien) 8002000E 0007000B <-- Note the 2 in 8002000E 0F270000 52000000 FFFD0000 00000000 28000004 000003E8 8003000E 0007000B <-- Note the 3 in 8030000E 0F270000 52000000 FFFD0000 00000000 28000004 000003E8 8004000E 0007000B <-- Note the 4 in 8040000E 0F270000 52000000 FFFD0000 00000000 28000004 000003E8
but if you want to just replace the value of an item & the value without doing a value search you would use this template
Code:800X0008 HHHHHHHH <-- ID Start 2nd part GGGGGGGG 00000000 <-- ID End 1st part 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 VVVVVVVV <-- Value 2nd part
so to set titanium to 1000 would be
Code:80010008 8E9FD8BC <-- 1st Part Block Range 1, ID Start 2nd part C7010000 00000000 <-- ID End 1st part 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 000003E8 <-- Value 2nd part
Titanium ID from google doc
8E9FD8BCC7010000
& to write to all 4 blocks
Code:80010008 8E9FD8BC <-- Note the 1 in 80010008 C7010000 00000000 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 000003E8 80020008 8E9FD8BC <-- Note the 2 in 80010008 C7010000 00000000 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 000003E8 80030008 8E9FD8BC <-- Note the 3 in 80010008 C7010000 00000000 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 000003E8 80040008 8E9FD8BC <-- Note the 4 in 80010008 C7010000 00000000 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 000003E8
If above item adjustment code fails try the new one by Zeraf3000#8256.
Code:80010010 1C000B01 XXXXXXXX XXXXXXXX <-- ID 1st Part & 2nd Part (Clean IDs, Little AM) 16000000 00000000 8801000D 60748566 00000000 00000700 0B000000 00000000 2800000D YYYYYYYY <-- Value
Example 99999999 Titanium
Code:80010010 1C000B01 8E9FD8BC C7010000 <-- ID Titanium "8E9FD8BCC7010000" 16000000 00000000 8801000D 60748566 00000000 00000700 0B000000 00000000 2800000D 05F5E0FF <-- Value (05F5E0FF = 99999999 in Hex)
Starter Saves From Discord - savewizard: Starter Saves From Discord - savewizard https://mega.nz/file/Qhs2nYgZ#qWrvqU5iS12B3scTLM-9I1bohzJEHOhia7I8gj3RTRk
I will remove the DL's if requested by the owners of the saves...Last edited:JeanDeMoreau
Skilled Gamer
Has anyone successfully activated following cheats? (Source: AC - Valhalla Codes [Save Wizard] - Pastebin.com)
At least one causes my save to crash.
Is it possible to create an overpowered character with these cheats?
Skill Points to 9999
80010004 C80A5A6E
2800000D 0000270F
Mastery Points to 9999
80010004 FB3DC61B
2800000D 0000270F
EXP Level to 9999
80010004 E84C8822
2800000D 0000270F
Power Level to 9999
80010004 5B81E813
2800000D 0000270F
Max EXP
80010008 12000B4C
9DE5CDCC 00000000
28000059 05F5E0FF
starkjim87
Pro Player
yes, i was able to successfully use the codes.
i was at the beginning of the game where you first get to your home. i maxed all the resources i had already. for the ones i didnt like tungsten ingot, i used the swap code to convert my silver to it first. then i went back in-game, sold a trinket for some silver and then modded the save again w/ another swap code. i kept doing that until i had every resource/mat item. once i maxed them out, i editted the save to manually set their count to 99999 via find&replace.
i'm not sure if you can make an OP character since i read enemies scale w/ you...so i didnt bother w/ the XP or power lvl codes. i think upgrading your gear is what makes you stronger for your level more. i did give myself skill points but manually set it to 100 so the game still gives me more as i naturally level up.JeanDeMoreau
Skilled Gamer
Thank you for your quick answer!
My question relates explicitly to the power codes (power level 9999 etc)...these are the ones I'm interested in...
Edit:
I used the 9999 power level cheat, but I couldn't see any changes ingame.
The 9999 EXP-Level Cheat together with max EXP caused the error with the save.
So I still don't know if it's possible to create an overpowered charakter.
Maybe you can help.Last edited:
try to use 1 cheat at a time, as combing multiple tends to have adverse effects, apply one & then apply the other one. one at a time not all in one go.
the game has introduced some hard caps to some things, so some will reset to in-game max & if you try to do too much you may end up corrupting it.thelastword11
N00b
LastImmortal
N00b
I want a code I can save where I change Item ID but receive 500 instead of 9999999 like in Save Wizard. How would I write the code for Ingots and Ores/Leathers. I found the ID's but it doesn't let me add the code to Save Wizard for some reason.
Nickle ID : B03C3670AF01000
800X0008 B03C3670
AF010000 00000000
88010008 52000000
FFFD5262 00000000
93000000 00000004
28000000 000001F4
Save Wizard doesn't let me input the X?
did you not take note of
?Code:Note the X in 800X0008 replace with either 1, 2, 3 Or 4 all this changes is where to look & write to, 1 = to 1st block, 2 = to 2nd block & so forth
your supposed to substitute the X with 1, 2, 3 OR 4
this code was written in a way where the values 1-4 would change the area the code would write to
EG:
Would write in the 1st BlockCode:80010008 B03C3670 AF010000 00000000 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 000001F4
Would write in the 2nd Block & so forth..Code:80020008 B03C3670 AF010000 00000000 88010008 52000000 FFFD5262 00000000 93000000 00000004 28000000 000001F4
800X0008 <-- where X = values 1 OR 2 OR 3 OR 4.
if you want a more detailed explanation what this does
80020008 <-- look for the ID OF B03C3670AF010000 & write once its found the ID the 2nd time in this example.weillersouza
N00b
Could someone please explain to me how to change the values of foreign supplies to 9999 in the save wizard program... I'm a newbie and I don't understand very well... Thank you very much.
